SV 111 Vibration Calibrator is the State of the Art instrument designed for in-situ checks according to ISO 8041. In-situ checks are intended for application in the field prior to and following a measurement or series of measurements. They act as a check of the instrument’s basic calibration and functionality.
The SV 111 is suitable for calibration checks of various types of vibration meters at different frequencies from 16 Hz up to 640 Hz. Depending on the selected frequency user may select level of calibration from 1 m/s2 to 10 m/s2. The design of the calibrator is based on the built-in triaxial reference accelerometer and microprocessor-controlled shaker. Following ISO 8041 requirement the reference accelerometer measures the cross-axis / transverse vibrations to detect interference on the calibration signal. Faults caused by transverse vibrations are indicated by three LEDS on the calibrator’s panel. This unique solution ensures the excellent stability of the calibration level & frequency independently from mass of the testing object. Shaker can be loaded with large weight up to 1 kilogram.
Any improper object fixing is automatically detected and indicated by LEDs on the calibrator’s panel giving the information about direction which should be corrected.
For calibration checks of tri-axial sensors set of dedicated adapters is available including a special adapter to Svantek whole-body sensors (seat-pads) for direct mounting on the shaker. Other types of vibration transducers can be conveniently attached using mounting stud, mounting disc or dedicated adapter.
Robust casing and built-in rechargeable battery enhance exceptional features of this new generation instrument.
Photos
Video
SV 106 in-situ check with SV111
Features
- Self-contained portable vibration calibrator
- Easy calibration of all type of vibration transducers for acceleration, velocity and displacement at 79.6 Hz and 159.2 Hz
- In-field accelerometer checks according to ISO 8041
- Built-in reference accelerometer
- Cross-axis / transverse vibrations detection
- Low frequency calibration at 15.92 Hz with maximum payload of 1kg!
- Complete seat-accelerometer calibration
- Automatic fault detection
- Display showing frequency, magnitude and errors
- Automatic power off with timer
- Robust design and light weight – 6.5 kg only
- Rechargeable battery
- Ready and easy to use in field
Specification
SV 111 Vibration Calibrator Specification
Generated Vibration Signal (Calibration) |
|
| Vibration accelerations (RMS in ms-2) | 1 (at 15.92 Hz) 1; 2; 3; 4; 5; 6; 7; 8; 9; 10 (at 79.58 Hz) 1; 2; 3; 4; 5; 6; 7; 8; 9; 10 (at 159.2 Hz) 1 (at 636.6 Hz) |
| Vibration velocities (RMS in mm/s) | 10 (at 15.92 Hz) 2, 4, 6, 8 10, 12, 14, 16, 18, 20 (at 79.58 Hz) 1; 2; 3; 4; 5; 6; 7; 8; 9; 10 (at 159.2 Hz) 0.25 (at 636.6 Hz) |
| Vibration displacement (RMS in μm) | 100 (at 15.92 Hz) 4, 8, 12, 16, 20, 24, 28, 32, 36, 40 (at 79.58 Hz) 1; 2; 3; 4; 5; 6; 7; 8; 9; 10 (at 159.2 Hz) 0.0625 (at 636.6 Hz) |
| Amplitude error | Less than ± 3% |
| Frequency error | Less than ± 0,5% |
| Transverse vibration | Less than 10% of the main direction |
| Harmonic distortion | < 5% (at 15.92 Hz) < 3 % (at 79.58 Hz) < 3 % (at 159.2 Hz) < 3 % (at 636.6 Hz) |
General Information |
|
| Maximum weight of calibrated object | 1000 grams (at 15.92 Hz) 300 grams (at 79.58 Hz) 200 grams (at 159.2 Hz) 200 grams (at 636.6 Hz) |
| Sensor mounting | Thread M5 x 12 mm |
Working Conditions |
|
| Temperature range | -10 °C ÷ 50 °C |
| Humidity range | 25% ÷ 85% |
Power Supply |
|
| Battery type | Rechargeable 6 V/12 Ah |
| Continuous operating time | Up to 20 hours |
| Automatic switch off | From 5 to 60 minutes adjustable |
| Charging time | Less than 10hours |
| Power supply for charger | 15 W; 8÷24 V |
Overall Weight and Dimensions |
|
| Weight | 8.2 kg (incl. battery) |
| Dimensions | 395 x 270 x 194 mm |
Optional Adapters |
|
| SA 111 | seat accelerometer adapter for SV 38, SV 38V, SV 100 (included) |
| SA 105B | adapter for SV 105B (option) |
| SA 155 | adapter for SV150 and SV151 (option) |
| SA 38 | adapter for SV 101 (option) |
| SA 40 | adapter for SV3233A, SV 3143M1 (option) |
| SA 44 | adapter for SV 50, Dytran 3023M2 (option) |
*Continuous product development and innovation are the policy of our company. Therefore, we reserve the right to change the specifications without prior notice.