LUBRI
Monitoring and Control of Lubrication Process + Vibration Data Collector
Saves your bearings
assures that your bearing is well greased
Lubrication optimization
add only necessary amount of grease into a bearing
Data collector
measure, store and trend bearing
and whole machine body vibrations
GREASING UNDER CONTROL
Lubri measures actual bearing vibration once the sensors is mounted on the bearing house. Keep pumping the grease and see the vibration value going down. Bearing is well greased once the value is not decreasing anymore. Extend your bearings lifetime as simply as this!
LUBRI MEASUREMENTS
LUBRI + FREE DDS SOFTWARE
TECHNICAL SPECIFICATIONS
Input:
1x ICP® powered accelerometer with 100 mV/g sensitivity
Output:
1x AC signal 8 Ω / 0,5 W for external headphones (signal listening)
Measurements:
Acceleration RMS 500 – 16 000 Hz [g]
Acceleration Peak 500 – 16 000 Hz [g]
Velocity RMS 10 – 1 000 Hz [mm/s, ips]
Velocity Peak 10 – 1 000 Hz [mm/s, ips]
Acceleration frequency bands 500-1 500Hz, 1 500-5 000Hz, 5 000 – 16 000 Hz [g]
Acceleration Peak 500 – 16 000 Hz [g]
Velocity RMS 10 – 1 000 Hz [mm/s, ips]
Velocity Peak 10 – 1 000 Hz [mm/s, ips]
Acceleration frequency bands 500-1 500Hz, 1 500-5 000Hz, 5 000 – 16 000 Hz [g]
Memory:
4 MB
Data storing:
Off-Route
Route with DDS software (free download)
Route with DDS software (free download)
Interface:
USB 3.0, 2.0 compatible
Software:
Free version of DDS software (limited database size)
Display:
Colour graphic OLED display 128×128 pixels, diagonal 1.5“ (38 mm)
Power:
2 x 1,5V (AA alkaline batteries) or 2 x 1,2V (NiMH AA rechargeable batteries)
Dimensions:
150 x 60 x 35 mm
Weight:
330 g including batteries (without cable, sensor and magnet)
DATA SHEETS & MANUALS
