I CAN FEEL IT…
…you can analyze it.
I CAN SEE IT…
…so you can see it.
I CAN HEAR IT…
…then you can hear it too.
I CAN AMPLIFY THE MOVEMENT…
…and I can do much more.
VIBRATION ANALYST DREAM
Measure 4 vibration signals and 4 process values (temperature, pressure etc.) along with speed synchronously. Triaxial sensor friendly, proximity probes for displacement measurement, ultrasound microphone, acoustic microphone, thermal imaging camera, current clamp meter, stethoscope and more.
28 YEARS OF ADASH EXPERIENCES
Analyze your data on site and enjoy the large screen size for playing with variable cursors, bearing fault frequencies indication and FFTs in cascade. A touchscreen and keyboard are at your service whenever you need it.
VA5 Pro specifications
4 x DC for process values
1 x TACHO for speed probe/external trigger
DC +/- 24V
No AutoGain function!
Maximum range: 0.35 Hz – 25 kHz (4 Ch, 64 kHz sampling)
Minimum range: 0.35 Hz – 25 Hz (4 Ch, 64 Hz sampling)
Data collector – route measurements
Balancer – 1 and 2 plane on site balancing
Run up – run up and coast down measurements
Recorder – raw signal recording for later post analysis
Stethoscope – listening of the bearing/machine noise
FASIT – expert system for automatic fault detection
Octave analyzer – hearable sound measurements
Bump test – measurement of natural frequencies
ADS – Animated Deflection Shapes (Operating deflection shapes)
Ultrasound – measurement of ultrasound in 30 – 50 kHz range
DEMOD – ENVELOPE analysis
ACMT – low speed bearing analysis
User band pass analysis
4 Ch memory consumption 3 GB/hour
4 Ch total recording – 20 hours
Speed change, Time interval