Description
VA3 ProEX
Intrinsically safe 3-Channel,
Vibration Analyzer, Data Collector
II 3G Ex ic op is IIC T3 Gc
ready for hazardous areas
A true vibration analyzer
real time FFTs, time waveforms etc.
Modularly based
buy only the modes you need
VIBRATION ANALYZER AS YOU WANT IT
VA3 Pro Ex
VA3 Pro Ex is a professional vibration analyzer determined to protect your machinery. Build your kit according to your needs. Single or multi axis sensors, speed probe and other accessories are ready for your vibration analysis and predictive maintenance program on general.
VERSATILITY & CONNECTIVITY
VA3 Pro Ex
3x AC input – vibrations
3x DC input – process values
1x Trigger input (speed probe)
Triaxial sensor ready
IR temperature sensor
LED stroboscope / flashlight
Fast USB 2.0 communication
Robust Push-Pull connectors
VA3 PROEX + FREE DDS SOFTWARE
Free trending and data analysis software
TECHNICAL SPECIFICATIONS
VA3 Pro specifications
| Ex certification | II 3G Ex ic op is IIC T3 Gc |
| Input channels | 3 x AC, ICP® power supply on/off 3 x DC for process values 1 x TACHO for speed probe / external trigger |
| Input range | AC +/- 12 V peak-peak DC +/- 24V |
| AD conversion | 24 bit, 64 bit internal signal processing No AutoGain function! |
| Dynamic range S/N | 120 dB |
| Frequency ranges (-3 dB) | Maximum range: 0.5 Hz – 25 kHz (64 kHz sampling) Minimum range: 0.5 Hz – 25 Hz (64 Hz sampling) |
| Sampling mode | Fully simultaneous for all 3 channels |
| FFT resolution | Min. 25 lines Max. 25 600 lines |
| Measurement modes | Analyzer – analytical measurements Data collector – route measurements Balancer – 1 and 2 plane on site balancing Recorder – raw signal recording for later post analysis Run Up – run up and coast down measurements Ultrasound – measurement of ultrasound in 30 – 50 kHz range LED stroboscope, LED torch FASIT – Expert system for automatic fault detection Vibration meter – basic vibration measurements |
|
Software
|
Free version of DDS software (limited database size) Licensed DDS software |
|
Data processing
|
Real time FFT DEMOD – ENVELOPE analysis ACMT – low speed bearing analysis Order analysis User band pass analysis RPM measurement DC measurement Orbit measurement |
| IR temperature measurement | From -70˚C to +380˚C (-94˚F to +716˚F) |
| Trigger | Manual, External, Amplitude, Tacho |
| Display | Colour 240 x 320 pixels, TFT |
|
Interface
|
USB 2.0, 3.0 compatible
|
| Operating temperature range | -10˚C to +50˚C |
| Power | |
| Weight | 780 g |
| Dimensions | 230 x 82 x 32 mm |
| Languages | Languages: English, Spanish, German, French, Portuguese, Russian, Czech, Hungarian, Polish |
DATA SHEETS & MANUALS
