SV 151 Triaxial accelerometer

SV 151 triaxial accelerometer has very high shock resistance, no DC offset effect, very low power consumption and a frequency response down to DC level. For the SEAT transmissibility measurements the small size SV 151 is placed on the vehicle floor in accordance to ISO 2631-1. The sensor’s built-in TEDS memory stores information about the accelerometer sensitivity that is automatically transferred to SV 106 instrument.

Photos

Specification

SV 151 Whole-body Triaxial Accelerometer Specification

 

Performance:

Number of axis 3
Sensitivity (± 5 %) 5.81 mV/ms-2 at 15.915 Hz
Measurement range 160 ms-2 PEAK
Frequency response 0 Hz ÷ 500 Hz
Resonant frequency 5.5 kHz (MEMS transducer)
Electrical noise < 0,066 ms-2 RMS, BL Wb weighting
 

Electrical:

Supply current < 5.0 mA
Supply voltage 3.3 V ÷ 5.5 V
Bias voltage 1,5 V ± 0.1 V
Output impedance 51 Ohms
Charge/discharge time constant 30 sec. typ
TEDS memory installed (power supply pin)
 

Environmental Conditions:

Maximum vibration 100 000 ms-2 shock survival for MEMS
Temperature coefficient <+/-0.02 %/°C
Temperature from -10°C to +50°C
Humidity up to 90 % RH, non-condensed
 

Physical:

Sensing element MEMS
Cable integrated 1.4 meters
Connector LEMO 5-pin plug (SV 106 compatible)
Dimensions 15.5mm x 15.5 mm x 15.5mm
Weight 20 grams (without cable)
 

Accessories:

Calibration adapter SA 155 (option)

*Continuous product development and innovation are the policy of our company. Therefore, we reserve the right to change the specifications without prior notice.

PDF